Lenovo Tab 2 A7-20F Motherboard Replacement

Geschrieben von: Thai Nguyen
  • Kommentare: 1
Lenovo Tab 2 A7-20F Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

20 Minuten

Einleitung

This guide demonstrates in detail the process of replacing the motherboard. No major technical background necessary for replacement.

  1. lWC6K43gtyC6nm2x
    lWC6K43gtyC6nm2x
    XJtSBsMTWGN6EnRH

    • Starting at any point along the seam of the case carefully pry it open with the metal spudger, slowly working your way around the outside until the case can come apart.

  2. Fl2Fgmmu63qdNO4l
    Fl2Fgmmu63qdNO4l
    pqNyyinOC4XkNvTT

    • The battery is connected to the motherboard by the thin wire shown here.

    • Pull up gently on the yellow tape to access the connector.

  3. uuEMMGWq1ihAun3b

    • Gently detach the connector from the motherboard by pulling up on it.

  4. IONxGnGMcUsFoRSE
    IONxGnGMcUsFoRSE
    oeEIKrFnuZZJF34O
    Qfwr5RJHHTTxslr2

    • There is double-sided tape inside the case.

    • Use the spudger tool to loosen the bond of the adhesive from the double sided tape.

    • Separate the battery from the case.

  5. BBMIpLoQhYdCgfRZ
    BBMIpLoQhYdCgfRZ
    BZMPLXddYMQUTrvn
    Fwj2R6DRNPJTbPrR

    • Use a plastic opening tool or a tweezer to remove any tape.

    • Unplug the electrical connectors by lifting the clip that hold them in place.

    • ''Use the plastic tools first before any metal ones since they can damage the motherboard easily'.'

  6. t2XYbXdPrpTUDSJR
    t2XYbXdPrpTUDSJR
    JUELoBBYTliE4erX

    • Remove the three 2.0mm screws using the Phillips #00 Screwdriver bit.

    • These screws are very small and can be lost easily. The black strip at the top of the motherboard is the speaker and the screws can be placed on that because it is magnetic.

  7. ZnI5Xuj3IX5q6eCh
    ZnI5Xuj3IX5q6eCh
    nuiUJJLYyUPMyRhX
    D1oUn3xChjMWpV1C

    • There are two twisted pairs of wires on the left and right edges of the case.

    • Use a plastic opening tool or tweezers to remove the twisted pairs that are held in place by retaining tabs.

    • These wires lead to objects that need to be carefully lifted from their enclosures at the base of the case using tweezers.

  8. XxIODQcMQLhwA6yF
    XxIODQcMQLhwA6yF
    sb6NEd5aben5Qo4Q
    P5FAxUJYQum3VTCC

    • After taking out the twisted pairs, there is still one more strip that needs to be removed. It is located off the side of the motherboard and is the piece that receives input for volume and power.

    • Gently lift up the motherboard starting from the right side. The final strip can be removed by gently pulling it up from the case.

    • Remove the motherboard completely from the back panel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Thai Nguyen

Mitglied seit: 21/09/17

217 Reputation

Ein Kommentar

I may do this, however, I need to know is this a fix for a Lenovo that won’t charge?

I addend a new battery and the Lenovo doesn’t seem to charge or turn on, is a new Motherboard then necessary?

millonthefloss08 -