Lenovo ThinkPad T15 Gen 2 Lower Case Replacement

Geschrieben von: Spencer Day
  • Kommentare: 0
Lenovo ThinkPad T15 Gen 2 Lower Case Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

10 - 20 Minuten

Einleitung

Use this guide to replace the lower case on your Lenovo ThinkPad T15 Gen 2.

Before you perform this repair, be sure to completely power off and unplug your laptop. Make sure the laptop is not in standby, sleep, or hibernation mode.

  1. l2UxRVEeDsSrnAEQ
    l2UxRVEeDsSrnAEQ
    LSUvVXJSAVeuuJxa

    • Use a Phillips #1 screwdriver to loosen the eight captive screws securing the lower case.

  2. FSl11VIrgi4bsGqm
    FSl11VIrgi4bsGqm
    oZQcIhVnWgHlEn2X

    • Insert an opening pick between the lower case and the chassis on the front right edge.

  3. b4LNuqOUqiNWjlJs
    b4LNuqOUqiNWjlJs
    NSTwoZABiFkmOhb2
    jlLF2UV1eYsGq5iD

    • Angle the pick down at about 30˚.

    • Slide the pick along the front edge to release the clips securing the lower case.

  4. ioZpQSXgUoLrwKTN
    ioZpQSXgUoLrwKTN
    PeAi1UeERf2VlJeq

    • Insert an opening tool between the lower case and the chassis just to the right of the USB port on the left edge. The end of the opening tool should be pointed upwards.

    • Push the opening tool into the ThinkPad while pushing the end of the tool down to release the clip that is next to the USB port.

    • It may take significant force and multiple attempts to release the clip. You will hear a popping noise when the clip releases.

  5. 1A1Km5RoIVHsGg4P
    1A1Km5RoIVHsGg4P
    HwUSrLglnPdnrsmp

    • Insert an opening pick on the left edge above the USB port. Slide the pick all the way up to the ethernet port to release the clips.

  6. PxNZ6BenxseIhUGp
    PxNZ6BenxseIhUGp
    JAuNUMnWCIsa2fiE

    • Insert an opening pick on the right edge near the corner.

    • Slide the pick along the right edge all the way to the HDMI port to release the rest of the clips.

  7. Devni3f6ynCLcAqb
    Devni3f6ynCLcAqb
    NJAdZsFnsvjp5OEx
    JKmNNEiHXlSPNHud

    • Lift the lower case from the chassis and remove it.

    • During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-stewards certified recycler.

Repair didn't go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad T Series answers community for help.

Tinte & Feder

Spencer Day

Mitglied seit: 14/09/22

17445 Reputation

0 Kommentare