Einleitung

Use this guide to replace the hard drive in your Lenovo ThinkPad T460 laptop.

A hard drive (also known as a hard disk drive, HDD, or hard disk) is a storage component in a computer. Hard drives use spinning disks and moveable parts, as opposed to the flash memory used in an SSD. Signs of a failing hard drive may include clicking or grinding noises, disappearing data, computer crashes, and an inability for your computer to recognize the hard drive.

If you are able to recover any data saved to your hard drive, be sure to back up your files before beginning this guide. Also, make sure to disable the internal battery, power down your device, and disconnect from any external power sources before you begin.

  1. hpGBLDjKCJOAmOhp
    hpGBLDjKCJOAmOhp
    nVEmNtOLUmvCRuxI
    KXrNpWJaYJPtKlUh
    • Before you begin this guide, make sure to disable the internal battery, power down your device, and disconnect from any external power sources.

    • Place the laptop so that the bottom is facing upwards.

    • Slide the latch on the left side of the battery to the left until it clicks in place.

  2. 2XWHAAAk5aRY3BQV
    2XWHAAAk5aRY3BQV
    sgvRkAHRYSkDSJTx
    SM4Ogc4Z5LSH3IfF
    • Slide the latch on the right side of the battery to the right and hold it in place with your thumb.

    • Use your other hand to slide the battery towards the back of the laptop.

    • Lift the battery up and away from the laptop.

  3. fJAPIITqhnHVPha4
    fJAPIITqhnHVPha4
    rwxpCLeElhMO4mTL
    • Loosen the eight captive screws in the bottom cover using a Phillips #1 screwdriver.

  4. EhKT3cNUv5X5iyZS
    EhKT3cNUv5X5iyZS
    5pFBdiIBNnCjeOF3
    OMTnCkNweBXQPVAG
    • Insert the flat end of a spudger in between the bottom cover and the rest of the laptop, starting in the lower left corner.

    • Pry the lower left corner of the bottom cover up by a few millimeters.

    • Slide the spudger along the bottom of the laptop to release the clips until you reach the lower right corner.

    • You may hear some snapping noises as the clips are released.

  5. qZwtknGXRD1PjfGp
    qZwtknGXRD1PjfGp
    jJZ16u4lDwoyXlaU
    • Slide the spudger along the right and top sides of the bottom cover to release the clips.

    • You may hear some snapping noises as the clips are released.

    • Potential for device damage: If the clips do not release easily, check to ensure that the captive screws are fully loosened. Forcing the clips to detach can crack the bottom cover.

  6. MJKPDKiCCtb1hUIW
    MJKPDKiCCtb1hUIW
    ZOTL1WgX1W5e6HF3
    • Use the spudger to pry the upper left corner up by a few millimeters.

    • Pry up the sections of the bottom cover with printed logos of the ports.

    • Potential for device damage: Prying inside the ports themselves can damage your laptop. Be sure to only pry up on the sections of the cover that extend past the ports.

  7. KH1EpFUDcRAWNgBc
    KH1EpFUDcRAWNgBc
    gFHT5lrXqHwjvojq
    • Use the spudger to pry up the bottom cover in the lower portion of the external battery compartment by a few millimeters.

  8. PXAlHYCI2dgVnfIR
    PXAlHYCI2dgVnfIR
    DZlWteBTPOcMcdTj
    Ob1hlBRQeQFTcalZ
    • Use both hands to lift the bottom cover up and away from the laptop.

  9. Yc1ENAvB4H1cACXR
    Yc1ENAvB4H1cACXR
    OToFOkHce2lhUwqH
    • Remove the single 3.7 mm screw from the left side of the hard drive using a Phillips #1 screwdriver.

  10. w2rSwi3LdPyyPSEI
    w2rSwi3LdPyyPSEI
    rKEUXT3XIqZhScev
    fEMvWysZs1URdJCA
    • Use your hand to lift up the hard drive by a few millimeters.

    • Pull the hard drive to the left to detach it from its connector, removing it from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Kristen Gismondi

Mitglied seit: 12/11/14

71827 Reputation

0 Kommentare