Einleitung

The keyboard is an essential component of the device so that a user can properly type a command into the device. If the keyboard isn’t properly recording your strokes, you may need to replace it.

  1. ddnAPKxuKSHJ1vyS
    ddnAPKxuKSHJ1vyS
    h52VZyjxom3o2N5Y
    UfOICHUfQXFPQ1lY
    • Be sure to power off and unplug your device before you begin your repair.

    • Flip the computer over so the bottom is facing up.

    • Remove nine 4mm Phillips #1 screws from the bottom of the computer.

    • Use an iFixit opening tool to pry the back cover off of the laptop.

  2. fOdRdIXDMVGeTYSW
    • Remove the five 4.5mm Phillips #1 screws that secure the battery.

  3. nyhDnYqmYQ1wCnaw
    • Using a pair of tweezers, push the sides of the white speaker wire toward the battery (where it says Lenovo) to unplug it.

  4. dQylClnMQuZ1gP1O
    dQylClnMQuZ1gP1O
    GVWajBOSZjFxfrbI
    UOsZ1TUpS4SCKJOg
    • Remove the speakers from either side of the battery. The connecting wire will unthread from the sides of the battery.

  5. C3PfMA6kPVdakxEI
    C3PfMA6kPVdakxEI
    cRywPrToNIDuV6qI
    mMLamVwBbEe5Keox
    • Lift the plastic black strip cover that's laying over the battery connector.

    • Use the iFixit opening tool to flip up and disconnect the black battery connector from its motherboard socket.

    • Gently pull the connector away from the battery to pull it out of the slot.

  6. YBFtmg6HbPcOQy6F
    • Lift and remove the battery away from the computer.

  7. iSJKuMcLJwwwPYxW
    • Remove four 4.5mm Phillips #1 screws from the corners of the heat sink.

  8. guofjcqEeCpTgFXb
    guofjcqEeCpTgFXb
    R6DCYCVS3s5uHKmZ
    FmhUEjjiLj4YveSS
    • Gently peel back the black plastic covering around the fan.

    • You may hear or feel the adhesive pulling away here.

    • Using an iFixit opening tool, flip up the small black cover of the fan plug.

  9. 52gxk1PdOGy2OotE
    52gxk1PdOGy2OotE
    V1hDf1SQm6PdKK5Z
    • Using tweezers, pull the plastic strip out.

  10. StocvPucrZi5YKLW
    StocvPucrZi5YKLW
    gA1CxOJDjN5JyoAd
    • Remove the fan from the computer.

    How does the user remove the fan?

    Sandy Branham -

  11. SUKqVMXrKj5LCvW6
    • Gently peel back the black plastic covering.

    • Remove the single Phillips #1 screw securing the wireless chip in place.

  12. wPmhw5VFt2qfcAQP
    wPmhw5VFt2qfcAQP
    TWDNRJIT1QdRDTkv
    • Use an iFixit opening tool to gently pop the gold caps off their connections.

    • Move these wires out of the way.

  13. L3RGfsZshlQ1mUDu
    • Slide the chip out.

  14. foaZMx6yreDrUvha
    foaZMx6yreDrUvha
    iSyvscNMFXRrLulD
    • Gently peel back the black plastic covering.

    • Remove the single 2mm Phillips #1 screw from the hard drive's silver casing.

  15. U6XjQlYT3j5YICKI
    • Unplug the hard drive from the computer by pulling away from the computer.

  16. jElSonCNxlHq2Nyc
    jElSonCNxlHq2Nyc
    VOoZ4urNxYJOb3Be
    Dq1XqaAiWp3QNDYb
    • Using the iFixit opening tool, flip up the eight small covers from the cable connectors.

    • Gently pull the cables out of the slots.

  17. xVnIbWvJrIxy1gyV
    xVnIbWvJrIxy1gyV
    5yUOSGPuKtsRTCKx
    • Using the Phillips #1 screwdriver, remove sixteen 4.5mm screws.

  18. nd1iNRAlS1MVhEIn
    • Lift and remove the motherboard away from the computer.

  19. C2hHYuWdaQbc3KRW
    C2hHYuWdaQbc3KRW
    ofmOgYUEsF2hKJeS
    • Using the Phillips #1 screwdriver, remove 23 (twenty three) 4.5mm screws.

  20. DDlRLJ1pETUWAXfD
    • Using the iFixit opening tool, lift the metal frame away from the keyboard.

  21. EPFLrCowFGqDwPYm
    • Lift and remove the keyboard away from the computer.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nicholas Frachiseur

Mitglied seit: 20/02/20

168 Reputation

Ein Kommentar

Samw steps on gen 4, screws just in different places, thie guide worked great! Thanks :)

Ryan B -