Lenovo ThinkPad x120e Keyboard Replacement

Geschrieben von: Jacob Fronzaglia

Kommentare: 1

Lenovo ThinkPad x120e Keyboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

7 - 15 Minuten

Einleitung

Before reading this guide on how to replace the keyboard for the Lenovo ThinkPad x120e, check the “Keyboard Not Responding” section on the device’s troubleshooting page to see if your issue can be fixed without replacement: Lenovo ThinkPad x120e Troubleshooting - iFixit

Reminder: make sure you turn off your laptop and remove any attached power cables before beginning..

Werkzeuge

Schritt 1

Flip the laptop upside down and locate the battery latches under the battery.
Place your thumbs on both latches and push the latch inwards.
With your thumbs still on the latches, slide the battery out of the laptop.
To install a new battery, simply slide the battery back in the slot. Then, check if both battery latches are locked

Schritt 2

Using the Phillips #0 screwdriver, remove the three 4 mm screws that are securing the bottom cover.
Remove the backplate carefully, making sure not to bend the cover.

Schritt 3

Using the Phillips #0 screwdriver, remove the two 4 mm retaining screws located on the battery slot.

If a harddrive is installed, remove the screws that secured the harddrive.

Henry Reade -

Schritt 4

Flip the laptop back over, showing the keyboard.
Using an opening tool, pry open the keyboard starting from the top left. Work your way around until you are able to loosely lift the keyboard.
You should see two ribbon wires located beneath the keyboard once you are done.

Schritt 5

Pull on the black tabs above both ribbon wires using tweezers upwards.
For more information on Zero Insertion Force (ZIF) connectors, please visit this guide.
Remove both ribbon wires.
Remove the keyboard from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jacob Fronzaglia

Mitglied seit: 25/10/21

787 Reputation