Einleitung
Werkzeuge
-
-
Using the Phillips #000 screwdriver, remove the screw that holds the optical drive in place. It is found in a square indent close to the center of the back panel of the computer.
-
-
-
Use the end of the screwdriver to assist in starting to slide the optical drive out.
-
Put it into the hole where the screw was removed.
-
Push towards the direction the optical drive slides out.
-
Once it can grabbed by hand, slide it out the rest of the way.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
