Lenovo Vibe Z2 Pro Battery Replacement

Geschrieben von: Bryan Sepulveda
  • Kommentare: 2
Lenovo Vibe Z2 Pro Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

9

Zeitaufwand

10 - 20 Minuten

Einleitung

If your phone is having issues holding a charge or the battery doesn't charge, it might be time to replace your phone's battery. Find out how to replace it in this guide

  1. IUpHJgaHZcEYtAoc
    IUpHJgaHZcEYtAoc
    U6WWKDgUQWgnjEFu

    • Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone

  2. 3hjMjVBBNfXNVKG5

    • Remove the 3.65 mm Torx head screws at the bottom of the phone.

  3. s1Fx6yHWNLHOasou
    s1Fx6yHWNLHOasou
    qCOrNfneqnC3cTwk

    • Remove the SIM card tray by pushing a pin into the hole on the side of the phone.

  4. eOWrg2St6DXlYaPV
    eOWrg2St6DXlYaPV
    KrnqlOlUMvwsYmPU

    • Push the Spudger along the gap between the phone and the backplate to separate them.

  5. fJpAtotpG1SJZ2IO

    • Carefully pull the backplate away from the phone.

  6. GqGorCaZLTNXYtOQ
    GqGorCaZLTNXYtOQ
    AXLqTwPcMCoimoUK

    • Peel away protective the film using your hands.

  7. CkoQcPsZEFcJFImn
    CkoQcPsZEFcJFImn
    ElOmMrBdvHUjfWKo

    • Remove any adhesive strips holding the battery in place gently using a fingernail or spudger.

    • The regular black nylon spudger should be used whenever possible, especially around batteries.

  8. 5p1Ms6iSEBpU2pKg

    • Disconnect the orange battery ribbon cable by gently lifting with a spudger.

  9. yDFMQsbWE1NZqiIw
    yDFMQsbWE1NZqiIw
    IUTCY5bCTqbQSBTg
    Kih3YS1w1QElkLxB

    • Insert a fingernail or spudger into either side of the battery and lift upward.

    • Remove the battery from phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Bryan Sepulveda

Mitglied seit: 15/09/16

547 Reputation

2 Kommentare

Where to buy such battery?

Damir Dominko -

wala pa po ba dito s pinas ng bl230?

eduardo santos -