Einleitung
This guide will show you how to safely remove the motherboard. Many components are built into the motherboard and cannot be easily replaced on their own, so replacing the motherboard as a whole may be necessary. Please take time to ensure a static free environment when handling the motherboard or other components.
Werkzeuge
-
-
Flip the computer over so the bottom is facing up.
-
Remove the ten 6mm screws with a T5 Torx security screwdriver.
-
-
-
Remove the six 3.3 mm Phillips #000 screws around the perimeter of the battery.
-
Remove the single 6.75 mm Phillips #000 screw from the center of the battery.
-
-
-
Grip the base of the connector with your fingers or pliers, and gently pull the connector straight back towards you to remove it.
-
-
-
Using your finger nail or a thin pry tool, unlock and remove the cables.
-
Lift the tape and pull the cable connector back to remove it from the motherboard.
-
Remove the eight 3.8mm screws with a Phillips #000 screwdriver.
-
-
-
Using your fingernail or a thin pry tool, lift the white bar on the cable to release it.
-
Pull the cable out.
-
-
-
Using a fingernail or a thin pry tool, lift the white bar on the cables.
-
Pull the cable out of the connector.
-
-
-
Lift the wide cable in the center to reveal the port for the small cable underneath.
-
Using a fingernail or a thin pry tool, lift the white bar to release the cable.
-
Remove the cable from the connector.
-
-
-
Lift the tape up to separate from the motherboard.
-
Using a fingernail or a thin pry tool, lift the connector upwards to separate from the motherboard.
-
-
-
Remove the black tape covering the connector.
-
Pull straight backwards to remove from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
