Einleitung

  1. kChZtk6LroZc6IPB
    • Ensure your device is completely OFF before starting this guide.

    • Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.

    • Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.

    • When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

  2. VIJmpowuxHAU4ny2
    VIJmpowuxHAU4ny2
    hHUtHNSiWAutT3po
    yjYeZmFvbMOIDjFK
    • Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover.

    • The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.

  3. oCY46Wye4PCXXkOm
    oCY46Wye4PCXXkOm
    BmFXCunMsPpvLmNL
    • Use a Phillips #00 screwdriver to remove the 3mm screw on the SSD.

  4. q4324X1yWYTIKQBa
    q4324X1yWYTIKQBa
    oDLTmxyUdCbojZZE
    • Use your fingers to lift up the SSD and pull away from the socket removing it from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Grant Doerksen

Mitglied seit: 18/04/17

957 Reputation

0 Kommentare