Einleitung

This step-by-step repair guide demonstrates a battery replacement for the Lenovo Yoga 900-13ISK. The battery supplies power to the computer while it is unplugged, allowing it to function as a mobile device. However, lithium ion batteries have a limited lifespan, and will start to lose the ability to hold a charge over time. If you notice that your Lenovo Yoga 900 is losing its ability to hold a charge, replacing the battery can restore the functionality of your device.

Batteries, even old ones, are toxic and cannot be thrown away in your normal waste bin. Please find a suitable e-waste recycler near you to properly dispose of your old battery.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If the battery within your device is swollen, take appropriate precautions.

Be sure to unplug and completely turn off your device before you start working.

  1. iPv1VlyTxQxoxqa5
    iPv1VlyTxQxoxqa5
    YlbrhAqDnTIYRgTM
    • Using a T5 Torx screwdriver, remove the ten 5.5 mm screws from the back case of the laptop.

  2. WrCrfbcYMa2QYBT2
    WrCrfbcYMa2QYBT2
    1hYBLMYwmAkKeVdk
    WDk2DgNOfV1YrZSE
    • Use a spudger to pry open the back case at the hinges of the laptop.

    • There are plastic clips around the perimeter of the case holding down the back cover. These will need to be popped off as the cover is removed.

    • Use your fingers to completely pop off the back cover.

  3. QkgyYHZ1WljCk3P3
    QkgyYHZ1WljCk3P3
    Dbetc2r2Cr25kmeS
    OA1xH5HoUihZRLPW
    • Remove the five 3.6 mm screws from the battery with a Phillips #00 screwdriver.

  4. k3RABbhhBKAQO1s3
    k3RABbhhBKAQO1s3
    6MfLagnBnV4YTOso
    nftRq1KFHOCYplHV
    • Grab the bottom corners of the battery and gently pull the battery until the cable disconnects from the connector on the motherboard.

    • While reassembling, use a plastic spudger to push the battery cable into the connector on the underside of the motherboard. This will be easier to do before the screws are replaced.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Austin Blakely

Mitglied seit: 11/03/19

17060 Reputation

Ein Kommentar

Phillips 00 will not fit the 5 screws in my computer!

Elaine Gelb -