Lenovo Yoga C930-13IKB Coolant Fan Replacement

Geschrieben von: Josiah Grayson Sawyer
  • Kommentare: 3
Lenovo Yoga C930-13IKB Coolant Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

20 - 30 Minuten

Einleitung

  1. PGwdSeNHuIIRRAXY

    • Flip the device over so that the underside is facing up.

    • Remove the six 3.5 mm T5 Torx screws.

  2. FiWHDiuuINDJFtQr
    FiWHDiuuINDJFtQr
    t5ZLbWjWV6hmBpOI

    • Pry off the back cover using the plastic opening tool.

    • Loosen the back cover in multiple spots using the opening tool, then remove the whole back.

    • You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.

    • Do not use a metal tool when working with your device.

    The gap is so small that I wasn’t able to insert anything to pry the cover up. The suction cup tool lifted the cover off easily.

    Thomas Capobianco -

    There is a very convenient spot to begin the prying process. Up by the hinge, where the metal back turns in perpendicular to the edge to get around the hinge mechanism, there is a gap between the cover and the rest of the laptop where it can be pried up easily. From there it is easy to run a tool and widen the gap all the way around.

    Alex Yantis -

  3. DeoIJJRpX2hNONcY
    DeoIJJRpX2hNONcY
    k1uvqt3b2ScVvJ5s

    • Carefully lift the cover off with your hands.

  4. lcNmOYdUq6TFshRg

    • Remove the four 3 mm Phillips #0 screws from the fan assembly.

  5. ScWZFEnjUnQc2xDO

    • Remove the four 2 mm Phillips #00 screws from the fans themselves.

    This is another redundant step since this is only to secure the fans to the heat pipe fan housing. And really tiny screws to lose.

    imark7777777 -

  6. uCZR3DdZcZluXG4k

    • Unscrew the three 3 mm Phillips #0 screws on the heatsink.

  7. PVGxMbC1sUlJOVZf
    PVGxMbC1sUlJOVZf
    LmVYJpNNW2QSMTpQ

    • Use a plastic opening tool to remove the two small, white power cable connectors for each of the two fans.

  8. sG5QmxjigWFMZZXe

    • Gently lift the fan assembly out of the laptop.

    • Be sure to clean and reapply thermal paste to the heatsink during reassembly.

Abschluss

To reassemble your device, follow these instructions in reverse order. Remember to apply fresh thermal paste to the heatsink during reassembly.

Tinte & Feder

Josiah Grayson Sawyer

Mitglied seit: 17/09/20

481 Reputation

0 Kommentare