Einleitung

Before you proceed with this guide, you should know how to remove the back cover.

  1. nWX3CWZZ4DcdDUMW
    • Remove the two Phillips #000 screws.

    • These screws are located behind the stand for the device.

    • Our device did not include these screws.

  2. BWShHZ3TZHOoR2VJ
    • Use a plastic iFixit opening tool to pry the edges of the back case loose by placing it in between the edge of the cover and the screen.

    • Do not immediately attempt to remove the back of the case without attempting Step three, or you risk snapping the back cover.

  3. 3NcExvPo6rJS6JAW
    3NcExvPo6rJS6JAW
    SKtg3VLeuMKa2QIU
    • Use the spudger to reach into the center of the device and pry off the back case by giving it a light force upwards.

  4. L4TKepBUTWoTTF15
    L4TKepBUTWoTTF15
    6DNxfE6trT2FqgwD
    • Remove the headphone jack cover with tweezers by grabbing it and pulling directly up and away from the device.

  5. TiPo4AHlw6KdgNIF
    TiPo4AHlw6KdgNIF
    u2SPshqNPvUKyPBm
    HCpv4V6sTytg6tK1
    • Remove the two 3.5mm screws using the Phillips #00 Screwdriver.

  6. XVZXMeFP5hYTrxwM
    XVZXMeFP5hYTrxwM
    MEkMakYc35roZWOm
    CsGxZjKjbckgMmIS
    • Disconnect the headphone jack from the motherboard by placing the spudger in between the connections and motherboard and pushing up towards you.

    • Pull the wire towards the headphone jack to disconnect it.

  7. CvPSLolMYLDlqrgR
    CvPSLolMYLDlqrgR
    ASN6TYV6xGEpVHyO
    • Use tweezers to remove the headphone jack by pulling it up and towards you.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Mahima

Mitglied seit: 24/01/19

234 Reputation

0 Kommentare