Einleitung
The Lifeprint 3 x 4.5 uses a rechargeable Lithium ion battery. In the case that the Lifeprint won’t charge, replacing the rechargeable battery is a potential solution to allow your Lifeprint to turn on.
Werkzeuge
-
-
Place one hand on the top cover and one hand on the bottom portion of the LifePrint.
-
While having the LP logo on the printer facing away from you, push the top cover away from you until it can't be slid away any further.
-
Pull the cover with the LP logo up to separate it from the rest of the printer.
-
-
-
Using a Phillips #0 screwdriver, remove the four 15 mm screws connecting both sections of the device.
-
Use an opening tool to remove the inner cover from the printer.
-
-
-
Remove three 4mm Phillips #0 screws connecting the metal shield covering the battery.
-
Slide out the white power connector with two red wires, two black wires, and one yellow wire from the terminal connected to the circuit board.
-
Apply pressure gently and slowly from underneath the battery from the plastic.
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
Où trouver la batterie ? Quelles caractéristiques ?
Baphi -
Possibly have a closed picture of the printer with an arrow of which way to push the top cover. Then have this picture second.
Ed LaLumiere -