Logitech G602 Side Motherboard Replacement

Geschrieben von: Matthew Ross
  • Kommentare: 1
Logitech G602 Side Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

5 - 10 Minuten

Einleitung

This guide will walk you through taking apart your Logitech G602 and replacing the side motherboard. You'll need a Phillips #00 screwdriver and a couple plastic opening tools to complete this guide.

  1. jLrEyulO4eoMFeOk

    • Use a blue spudger to pry all 4 mice feet from the bottom of the mouse.

  2. eviy1L6L5bCtaFVc

    • Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm) from underneath the mice feet.

  3. S66Q1TAa1lAknUGK
    S66Q1TAa1lAknUGK
    LZCNDFeLPPq3knmv

    • Use the blue spudger to prop open the bottom battery port.

    • Remove the AA batteries.

  4. DLSalwnhLEKGHI1I

    • Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware.

  5. WSNvhBoVWM5XMQxk
    WSNvhBoVWM5XMQxk
    NRBIPyQDsnISMSlK

    • Use tweezers to grip and pull the white ribbon cable from the motherboard.

  6. ZlPGIIhSXBB4HdkX

    • Use a Phillips #00 screwdriver to remove both screws (3x5mm ) from above the side motherboard.

  7. C1hMiprJZZhRyYaY

    • Use a Phillips #00 screwdriver and unscrew both screws from the side motherboard.

    • We used a set of pliers and a Phillips #00 screw bit because the screwdriver couldn't fit into the side of the device.

    In order to reach the screw easier, you can remove the right mouse button

    Chuck Sampson -

  8. THWrnTcPHJHnnvIM

    • Use a black spudger and your fingers to loosen and remove the side motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Matthew Ross

Mitglied seit: 17/01/18

175 Reputation

0 Kommentare