MacBook Unibody Model A1342 optisches Laufwerk austauschen

Geschrieben von: Walter Galan
  • Kommentare: 16
MacBook Unibody Model A1342 optisches Laufwerk austauschen

Schwierigkeitsgrad

Mittel

Schritte

9

Zeitaufwand

Keine Schätzung

Einleitung

Diese Anleitung ist eine grundständige Anleitung.

  1. QvVK4TYshldqWAI1

    • Entferne die einzelne 12 mm Kreuzschlitzschraube, mit der die Oberseite des rückwärtigen Lautsprechergehäuses am oberen Gehäuse befestigt ist.

  2. eotMKER5tUxUyR2j

    • Entferne die einzelne 2,2 mm Schraube, die horizontal in die Seite des optischen Laufwerks eingesetzt ist.

    • Diese Schraube befindet sich in einer Öffnung in der rechten Lautsprechereinheit und ist nur von der Scharnierkante aus sichtbar.

    Finding this screw wasn't easy

    Leonardo Echeverria -

    Where did you find that Screwdriver?

    jesusalbaregidor -

    I put my laptop vertically so I could get the screw out. Trying it sideways while the laptop laid flat wasn’t working.

    Mr Poofy -

  3. RqX1xtCZrnGsmxiv

    • Verwende das flache Ende eines Spudgers, um den AirPort / Bluetooth-Flachbandkabelstecker vom Logic Board abzulösen.

  4. XhuMdFXRxNraGHcF

    • Verwende das flache Ende eines Spudgers, um den rückwärtigen Lautsprecheranschluss vom Logic Board abzulösen.

    • Heble unter den Kabeln.

    • Dieser Stecker ist sehr empfindlich und leicht zu beschädigen.

    Step 10. If you are having difficulty with the small connector, insert something thin and long underneath it (preferably not metal, as you can scratch the motherboard that way). There is some space under it that you can use to get it loose.

    Remember, the amount of force required to loosen it is very small. Take a break if necessary if you are getting frustrated.

    Stephen Eilert -

    I would recommend not removing this as part of this step. You can easily slide the drive under the speaker wire -- just lift it from the side with two screws carefully.

    Matt Mastracci -

    i just broke the connector! Be very carefully here. Needed to sold the speaker cabels then...

    rafa74 -

    I broke it, obviously... I tried to put it back; it seems to be solid enought, but the speaker now sounds really bad(low and noisy-undefined). Any ideas on how to fix it?

    gl84 -

    PLEASE TAKE THIS STEP AWAY!!!!!

    I now have the same as the rest of the loyalty of Ifixit’s…. I glued it and have the crappy tinny low volume sounds, thanks

    Peter -

    Same here. I broke it too, tried to glue it back and have sound, luckily, but very bad quality. THIS STEP IS UNNECESSARY!

    Jens Lubbadeh -

    This step has been very badly explained. I too have now broken my speaker connection. As others have said, you're just trying to lift the cable up NOT "PRY THE SPEAKER CONNECTOR UP OFF THE LOGIC BOARD" as instructed here! Doing this will break the soldered connection to the board. Now I need to take it to a professional for a solder repair.

    Nick -

    Hi There, broke the connector.

    I could not remove the cable even with the broken off connector.

    Soldered it back on, low wattage and very little tin needed.

    When putting the drive back in, I found that the loudspeaker cable could easily fit under the drive holder.

    So, in future in case of problems with the drive, no more broken off connectors..

    vos474 -

    Do not try to remove that connector ! It is too much fragile. As other users did, I broke it … And I don’t know if it will be possible to repair it.

    Jean-Pierre Giovanni -

    Same here, I was very careful, but the connector broke off, of course. Tried to glue it back, but now the sound it very low, noisy, almost useless. Any idea to fix it? :)

    szezo -

    Are you f****g serious? This step is unnecessary!!!!!!!!!!!!!!!!!!

    My connector broke!!!!! How can i fix it????

    Jack son -

  5. cuNq1SK4ZoUFGQN3

    • Drehe die rückwärtige Lautsprechereinheit (mit noch angeschlossenen AirPort- / Antennenkabeln) vorsichtig aus dem unteren Gehäuse.

  6. KjEWbnIkFuu5VjRO

    • Verwende das flache Ende eines Spudgers, um den Stecker des optischen Laufwerks vom Logic Board abzulösen.

    The connector broke while removing it... be careful

    Leonardo Echeverria -

  7. yoDB3eMjQiloCFmT

    • Entferne die einzelne 4,5 mm Kreuzschlitzschraube, mit der die Halterung des optischen Laufwerks am oberen Gehäuse in der Nähe des Lüfters befestigt ist.

    The screw here in my laptop was stuck. If this happens to anyone else I recommend using needle nose pliers, and put rubber band over the screw, and grasp the screw by the sides with the plier to work it out slow until you can unscrew it.

    Mr Poofy -

  8. v1LaQ1VTksGtvLqv

    • Entferne die zwei 2,5 mm Kreuzschlitzschrauben, mit denen das optische Laufwerk am oberen Gehäuse in der Nähe der Öffnung des optischen Laufwerks befestigt ist.

  9. I2V2JRXo1oFovlAF

    • Hebe das optische Laufwerk nahe an seinem Anschluss an und ziehe es vom oberen Gehäuse weg, um es aus dem Computer zu entfernen.

Abschluss

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.

Tinte & Feder

Walter Galan

685540 Reputation

0 Kommentare