Magellan RoadMate 1440 Back Cover Disassembly

Geschrieben von: Benton Burns
  • Kommentare: 1
Magellan RoadMate 1440 Back Cover Disassembly

Schwierigkeitsgrad

Very easy

Schritte

5

Zeitaufwand

3 Minuten

Einleitung

The back cover needs removed before any other guide is executed.

  1. i1MWJVDLndNVYRrI

    • Place the GPS with the screen facing down.

  2. LisFCmskdaKQaiAt
    LisFCmskdaKQaiAt
    IDN6LNdCyYHbTmqG

    • Remove the four 4.2 mm screws on the back cover of the device using a Phillips #0 screwdriver.

  3. WxLDKFIWM5p3ijWM
    WxLDKFIWM5p3ijWM
    BQgJSw45ZtvXTTCj

    • Remove the two 4.2mm screws at the bottom of the device using a Phillips #0 screwdriver.

  4. GUpPP5sUHBhMpxRh
    GUpPP5sUHBhMpxRh
    ljBhKOarKIQPQm61
    bNPXnqRTcvH3qxtT

    • Insert the black spudger into the crease in the side of the GPS.

    • Move the end of the spudger down to break the seal between the two plastic shells.

    • Continue doing this along each side of the GPS to ensure a smooth removal.

    Before seperating the cover panels secure the on/off slider to the front panel with tape. If it falls out the micro swith is easy to damage. The small white tab breaks with ease.

    mrkenhoward -

  5. AFATJFfGsujCTJJZ
    AFATJFfGsujCTJJZ
    BxZYoQeuGGlyIxY2
    F5VfpWpN3tjHYHdY

    • Fully separate the two sides of the case.

    • Remove the tape on the battery wires and the tape on the speaker wires.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Benton Burns

Mitglied seit: 21/03/16

209 Reputation

0 Kommentare