Einleitung

Follow this guide to replace the power switch on your device.

  1. i1MWJVDLndNVYRrI
    • Place the GPS with the screen facing down.

  2. LisFCmskdaKQaiAt
    LisFCmskdaKQaiAt
    IDN6LNdCyYHbTmqG
    • Remove the four 4.2 mm screws on the back cover of the device using a Phillips #0 screwdriver.

  3. WxLDKFIWM5p3ijWM
    WxLDKFIWM5p3ijWM
    BQgJSw45ZtvXTTCj
    • Remove the two 4.2mm screws at the bottom of the device using a Phillips #0 screwdriver.

  4. GUpPP5sUHBhMpxRh
    GUpPP5sUHBhMpxRh
    ljBhKOarKIQPQm61
    bNPXnqRTcvH3qxtT
    • Insert the black spudger into the crease in the side of the GPS.

    • Move the end of the spudger down to break the seal between the two plastic shells.

    • Continue doing this along each side of the GPS to ensure a smooth removal.

    Before seperating the cover panels secure the on/off slider to the front panel with tape. If it falls out the micro swith is easy to damage. The small white tab breaks with ease.

    mrkenhoward -

  5. AFATJFfGsujCTJJZ
    AFATJFfGsujCTJJZ
    BxZYoQeuGGlyIxY2
    F5VfpWpN3tjHYHdY
    • Fully separate the two sides of the case.

    • Remove the tape on the battery wires and the tape on the speaker wires.

  6. D5yfVI22Pb6Pr5QV
    • Once the back cover has been removed, lift the power switch from the device.

    • This is only a sliding switch, the button to power the device on is inside the unit

    i think i lost the plastique part at the end of the sliding button and now i have no contact and no spring when i turn on the g.p,s. where can i this part .i live in canada .but now i am in boynton beach florida tillthe end of the month my e mail is gilles_lachapelle@hotmail.ca

    gilleslachapelle -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jeremy Johnson

Mitglied seit: 21/03/16

201 Reputation

0 Kommentare