Magic Bullet NutriBullet Base Replacement

Geschrieben von: Angela Wong
  • Kommentare: 4
Magic Bullet NutriBullet Base Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

2 Minuten

Einleitung

If you notice any sharp, moving components outside of your NutriBullet base, then use this replacement guide to learn how to remove and replace the base.

  1. ruAIScAtfSrsP1mR

    • Unplug the device from the wall and turn the powerbase upside down.

  2. NASuTkeWWPh4oFqf
    NASuTkeWWPh4oFqf
    OkAyjmwKtOIM4kZn

    • Unscrew the four 10mm screws located on the bottom of the powerbase using the Phillips Head #2 Screwdriver.

  3. PisrThYEt5aED3lm

    • Once the screws are removed, use slight tension to pull the plastic base up.

    • Make sure the cord does not get caught or frayed by the fan, which is located in the center of the power base.

    ensuite comment défaire le reste

    eliette campeau -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Angela Wong

Mitglied seit: 22/01/15

1072 Reputation

3 Kommentare

So far it was easy! Yeah!

Elaine -

With a lot of force can’t get bottom of even 4 screws removed Bullet don’t work anymore may be a piece of junk now

Tommy Simpson -

Where can you buy the base to replace?

Anne-Christine von Wetter -