Magic Bullet NutriBullet Curve Base

Unplug the device from the wall and turn the powerbase upside down.

Use a #2 Phillips Head Screwdriver to unscrew the four 10 mm screws located on the bottom of the power base.

Use slight tension to remove the plastic base from the NutriBullet once all of the screws are removed.

Lift the power cord to remove it from the side slot on the curved base.

Use a #2 Phillips Head Screwdriver to remove the two 10 mm screws that secure the white bracket down.

Use a #2 Phillips Head Screwdriver to remove the three 10mm screws that keep the base in place.

Use slight tension to remove the curved base by lifting it upward off of the outside casing.