Makita DT01 The trigger Replacement

Geschrieben von: Ya'Rub Al Manwari
  • Kommentare: 0
Makita DT01 The trigger Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

This guide walks your through the steps required to replace the trigger on the Makita DT01 drill.

  1. bCZruFNKqp2D5W4B

    • Take out the beterry.

  2. rB5LAQknFOXn3ADJ

    • Unscrew the six screws on the top of the drill.

  3. 2ElEZ4ZZjomJfTNF
    2ElEZ4ZZjomJfTNF
    iyIpB4jap4OFpsSR

    • Place the big trigger out to be able to remove the other trigger smoothly.

  4. wlnjUp2B41AMggfa
    wlnjUp2B41AMggfa
    YcLSQQSoaBEi3gTE

    • Take out the broken trigger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ya'Rub Al Manwari

Mitglied seit: 15/02/17

201 Reputation

0 Kommentare