Makita Jack Hammer HM1203C 2010 Motor Cover Replacement

Geschrieben von: Adam O'Camb
  • Kommentare: 0
Makita Jack Hammer HM1203C 2010 Motor Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

1 - 3 Minuten

Einleitung

Use this guide to remove or replace the motor cover on a Makita Jack Hammer HM1203C 2010.

  1. 1tQ4rEpfJXZA1NYl

    • Make sure the hammer is disconnected from power before beginning any repair.

    • Use a Phillips #2 screwdriver to remove the three screws securing the motor cover.

  2. U2L2NPNyCs62USnK
    U2L2NPNyCs62USnK
    YgbRnmBUVWvwict1

    • Remove the motor cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Adam O'Camb

Mitglied seit: 11/04/15

178852 Reputation

0 Kommentare