Mantis Tiller 7940 (2017) Spark Plug Disconnection

Geschrieben von: Tarun Thiruma
  • Kommentare: 0
Mantis Tiller 7940 (2017) Spark Plug Disconnection

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

2 Minuten

Einleitung

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

Follow this guide to disconnect the spark plug on the Mantis 7940 Tiller (2017) in preparation for a repair.

Werkzeuge

  1. YDaaGYrMhxBFimnK

    • Before starting any repair, ensure the ignition switch is in the "off" position, as shown.

  2. avMY5GDWTICUDkXB

    • Use a 4 mm hex wrench to remove the bolt securing the spark plug housing.

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

  3. XveLGIyiHXE6hWcj
    XveLGIyiHXE6hWcj
    Mkdb1MRpZLeesyel
    LXJQTsT3K4nAZKBP

    • Remove the spark plug housing from the engine.

  4. bYvqLdl1W3jAtOMx
    bYvqLdl1W3jAtOMx
    plAfVSDImdaSOGS3
    PGmXOinlPm2bmDTr

    • Grab the rubber housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tarun Thiruma

Mitglied seit: 20/11/19

32532 Reputation

0 Kommentare