Einleitung

This is a guide to remove the Camera for the Matsunichi M97 9in tablet. To use this guide you will need a spudger, or an iFixit opening tool, a Phillips 00 Screwdriver, and tweezers. This guide requires the Battery Removal Guide, and the Motherboard Removal Guide as prerequisites.

  1. EFl3eeaPI2DUSBDx
    • Open the micro SD cover located on the back of the device.

  2. DWxSMI3WK4pYMs1H
    • Using the Phillips #00 screwdriver, remove the two 4mm screws next to the micro SD port.

  3. bMWXEXKLeKAbJ6ea
    bMWXEXKLeKAbJ6ea
    irObTgNh6NNuqA2V
    bjlqon6aTAkvHvJK
    • Use the iFixit opening tool to pry off the back cover of the device.

    • The volume buttons and the lock switch will come loose when the back comes off.

  4. iH2HHU26TMEe5FU2
    iH2HHU26TMEe5FU2
    kXpSMVuNHRJoYT4v
    • Use a pair of tweezers to disconnect the battery from the motherboard.

  5. H6KSqAn3PneL5dBM
    H6KSqAn3PneL5dBM
    ewLT6r3pZYbuupOq
    • Carefully unstick the battery from the frame using the spudger.

    • Do not bend or puncture the battery during removal.

  6. LiWmMXi6WuhDIgZu
    LiWmMXi6WuhDIgZu
    gsAKMAPHpEhaxGVW
    • Remove the six 2mm screws that hold the motherboard onto the case using the Phillips #00 screwdriver.

    • Use the same screwdriver to remove the single 4mm screw.

  7. OZEXXYJU2hUxyEbv
    OZEXXYJU2hUxyEbv
    F6qO1f3PP4thVRXa
    • Gently pull the display ribbon cable to unplug it from the motherboard.

  8. DNZRUuLOmgiCVBl4
    • Use a spudger or an iFixit opening tool to lift the locking mechanism holding the camera ribbon cable.

  9. NIs2w1XIQMVnjGWB
    NIs2w1XIQMVnjGWB
    qfyJDwftwJKFHAAq
    • Lift up on the wifi antenna cable to unsnap it from the motherboard.

    • Then unhook the cable from the holding bracket.

  10. YnlQemJDGpxLYMtg
    YnlQemJDGpxLYMtg
    mYAuuSdIW6mCfSWX
    • Use the spudger or iFixit opening tool to lift up on the locking mechanism for the digitizer ribbon cable.

    • Pull the cable from its connection.

  11. nUOGwqFtdFvk3cOq
    nUOGwqFtdFvk3cOq
    RRjYbDEuuEDtFXlD
    • Use the Phillips #00 screwdriver to remove the four 4mm screws that hold the speakers in place.

  12. QUoGv5XJa6DvWOhh
    • Pull the vibration motor out of its housing.

  13. i5XURt5p6D2ZUImJ
    i5XURt5p6D2ZUImJ
    LRP2LFVLLkNng3AH
    • Lift the motherboard off the frame.

  14. 3Y6QZfXgQcOba35U
    3Y6QZfXgQcOba35U
    2fLBhfg3OXPlYGfa
    • Remove the camera from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Violet Ruff

Mitglied seit: 16/01/20

93 Reputation

0 Kommentare