Megawheels S10 Rear Mudguard Replacement

Geschrieben von: Andrew DiCapo
  • Kommentare: 0
Megawheels S10 Rear Mudguard Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

5 - 10 Minuten

Einleitung

This guide will go over the steps for replacing the rear mudguard on a Megawheels S10 electric scooter.

The mudguard serves as a manual brake for the scooter as well as providing a tail light, so when this piece has taken too much damage or stops working, it removes an important function to your scooter.

The process for this replacement is simple and does not require a lot of experience or prior information in order to complete.

  1. u3SSbqmSOnbcc2AE

    • Hold down the power button and wait for a beep to ensure that the scooter is turned off.

  2. DCwJVikFHSvMHNpc

    • Put up the kickstand so that the scooter is upright.

  3. PQiwrSGPwPqvD6e4

    • Unscrew the old mudguard.

  4. QtJxf3nPU5fOo6kF

    • Grip the wheel and pull off the mudguard.

  5. TkrrJKSQ4bJmUKPQ

    • Remove the connector.

  6. EPvLllAJj1cVTNEN

    • Attach the new mudguard's power connector.

  7. RcDPlQUCghQb32gU

    • Line up the new mudguard with the screw holes and reinsert the screws.

Abschluss

If these steps are followed correctly, then your manual break and tail light should function good as new!

Tinte & Feder

Andrew DiCapo

Mitglied seit: 28/09/21

145 Reputation

0 Kommentare