MiTM Pressure Washer CM1400HDEC1 2017 Electrical Box Removal

Geschrieben von: Taylor Dixon
  • Kommentare: 0
MiTM Pressure Washer CM1400HDEC1 2017 Electrical Box Removal

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

Keine Schätzung

Einleitung

This is a pre-req guide for the removal of the electrical box on the CM1400HDEC1 201 MiTM electric pressure washer.

Werkzeuge

  1. ULGTlE4Zhn4UHvLR

    • Remove the four 59.2 mm-long 4 mm hex socket bolts from the electrical box.

  2. pyaDEdBMXCMUbNvp
    pyaDEdBMXCMUbNvp
    tYtYSsfxuNhupjIW

    • Carefully pull the electrical box away from the engine until you have enough space to work inside it, making sure not to strain the cables that are still connected inside.

    • If you have trouble lowering the electrical box, you can disconnect the green power cord wire for more slack.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Taylor Dixon

Mitglied seit: 26/06/18

63211 Reputation

0 Kommentare