Microsoft Band 2 Wrist Clasp Replacement

Geschrieben von: Katherine
  • Kommentare: 1
Microsoft Band 2 Wrist Clasp Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

4 Minuten

Einleitung

Occasionally there are issues with the clasp where the watch will no longer connect to the other side of the watch due to the two metal push prongs becoming weak and flimsy. This guide will cover how to replace the spring that wedges in between those two prongs in order to make the watch wearable again.

  1. g1diIasAEbGHM5aE

    • Use the T3 screwdriver to remove the two 2mm screws in the device. The top metal panel should come off with ease once the screws have been removed.

  2. CAHXd4b63AP4vpoo

    • Separate the watch band from the bottom metal panel.

    • There is a spring underneath the watch band that may break loose.

  3. QGq1bGkZqLoKEk2v
    QGq1bGkZqLoKEk2v
    wbIyxH63q4aBvkUH

    • Remove the spring.

    Anyone knows how to repair this little strap that connects charging pins to the band's strap? Mine broke when screws fallen off, and I can't load it. MS support told me to buy a new device so yeah I'm literally screwed...

    Wojtek -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Katherine

Mitglied seit: 20/02/17

208 Reputation

0 Kommentare