Microsoft Surface Pro 2 Motherboard Replacement

Geschrieben von: Christopher Doyle
  • Kommentare: 0
Microsoft Surface Pro 2 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

Keine Schätzung

Einleitung

  1. fMQEhD2v4jxPLDyL
    fMQEhD2v4jxPLDyL
    YOwSEmD5FQ3exqEC

    • To avoid electrical shocks, unplug and turn off your Surface Pro 2 before proceeding.

  2. TYSheDpff1mufOPB

    • Avoid any skin or eye contact with the heating pad or heating gun because they may cause bodily harm.

    • Using a heating pad or heating gun, heat the edges of the screen to soften the glue. This area extends roughly one inch from the edge of the device.

    • The glue is under the darker border of the device display.

  3. BQXsTnlvGB6KWIPD

    • Using a plastic opening tool and a suction cup as needed for leverage, gently insert one edge of the opening tool under the corner of the screen.

    • If the tool does not easily slide under the screen, return to heating before proceeding.

    • Slowly work the tool around the entire edge of the screen.

  4. GTvUuc5OeoXXvjTx
    GTvUuc5OeoXXvjTx
    5bEqNLbgsZZ6S3AO
    2JPfNVPcjeMHmhQr

    • Detach the orange cables that connect the screen to the motherboard by pulling on the small tabs. Using the nylon spudger, release these cables.

    • Please note the third small connector in red.

    • Allow the glue to cool before letting it come into contact with any other surface.

  5. skWCjbgI1EQHkLA1
    skWCjbgI1EQHkLA1
    vZwdsNsAieS2LgjT
    DIDxukMKWQDFNXYE

    • Make sure that the front-facing camera is completely disconnected, and then remove the plastic bracket.

    • Remove the 22 screws on the bezel.

    • Remove the left and right brackets; the left has 16 screws and the right has 15 screws.

    • The three different torx screws used are T3, T4, and T5.

  6. vGDMDjGbTlHEDZCD
    vGDMDjGbTlHEDZCD
    uIiAmWBqexZlOVNu
    ZwXc4YK3MCM3Ciyy

    • Once the brackets are removed, set them aside.

    • The motherboard itself also has screws.

    • Remove the 25 screws of varying sizes that attach the motherboard to the back plate.

    • View the attached photo of a screw diagram to help keep track of your screws.

  7. GGONHVpoBTIWuqvW
    GGONHVpoBTIWuqvW
    uj3QKcmOXqjDVIEH
    n2JikGqONQpw4IQi

    • You have now completely removed the motherboard, and it should look like the pictures shown.

    • Be sure to be cautious with all the connections with the cables on the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Christopher Doyle

Mitglied seit: 07/09/16

131 Reputation

0 Kommentare