Microsoft Zune 80 Case Replacement

Geschrieben von: turey
  • Kommentare: 1
Microsoft Zune 80 Case Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

10 Minuten

Einleitung

Removal of case backing, allowing for access to internal components.

  1. 6g1kCjBK1NxwKbP2

    • Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

  2. 4SMRmIptYc4I1FSy

    • There are two T4 screws under the cap. Remove both with a T4 screwdriver.

    • Be careful removing the screws; the screw heads can break very easily.

  3. YuVgVF65CEVudTo1
    YuVgVF65CEVudTo1
    FgKZoMIkbXBwi3vc

    • Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.

    • Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

turey

Mitglied seit: 12/11/09

362 Reputation

Ein Kommentar

I have followed these steps but im unable to get the back case off, any tips for a stubborn backing?

zippy9765 -