Einleitung
Use this guide if you need to replace the outer casing of your Milwaukee Hackzall 2625-20.
-
-
Remove the screws holding the shell of the device together. Each screw size varies; you will use a T9 Torx screwdriver for one size 7.0 mm.
-
Use a T10 Torx screwdriver to remove one 14.0 mm screw.
-
Use a T15 Torx screwdriver for the remaining eight screws that are 16.0 mm.
-
Remove the casing to reveal all of the internal components.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
