Einleitung
Does your Milwaukee Hole Hawg have sparks coming from the motor during use? If so, the motor brushes could be worn and in need of replacement. Here is a link to the Milwaukee Hole Hawg 1675-1 Troubleshooting Page. The carbon brushes conduct electricity to the armature through contact with the spinning commutator. Over time the brushes will wear down and cause sparking which is a sign they need to be replaced. All you will need is a standard #4 Flat Screwdriver head to remove the brush cap and the brush itself.
Werkzeuge
-
-
Pry up on the copper brush holder with a screwdriver or spudger.
-
Continue lifting up the copper brush holder to remove the brush.
-
Repeat on the opposite side.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
