Motorola Atrix HD Battery Replacement

Geschrieben von: Bradley Hinckley
  • Kommentare: 1
Motorola Atrix HD Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

15 Minuten

Einleitung

If you find that your battery no longer holds a charge, or is causing your phone to be inoperative, this guide will help you to replace it.

The battery may be removed with or without removing the back chassis. However you choose to remove it, take extra care when removing the ribbon cable attached to the motherboard, it is very thin and easily damaged.

  1. cXWgsirAVfTu1WNP
    cXWgsirAVfTu1WNP
    vsInsB5mxJDp5GpB
    qjPwTKq3jfmfrAbv

    • Before disassembling the phone, remove the SIM card and the MICRO-SD card, if equipped.

    • Begin taking apart the device by prying apart the back cover from the assembly using the plastic opening tool.

    • Continue working around the edge of the phone using the plastic opening tool.

    • When all the edges have been lifted apart, use your hands or plastic opening tool to peel the back plate from the battery. There are small adhesive strips between the back cover and the battery, so take care not to crack the back cover while prying open.

  2. U2ekxIWqGNn4KiVT

    • The adhesive strips are shown in the orange boxes. Be sure not to use too much force to pull off the back cover, or you may risk snapping the back cover.

  3. EOXAuN5TUXtwfQii
    EOXAuN5TUXtwfQii
    ZFmhUqFmmptbnLgP
    PtxbaIUQfKRyiIwF

    • Remove the red rubber screw cover with a pair of tweezers

  4. RTfFsTsYLsygrlMd
    RTfFsTsYLsygrlMd
    TumNY1QiJowovoWP

    • Use the T-5 Torx bit to remove the two silver 3.3 mm screws with integrated washers.

  5. XAgIZCYjOUEvM1VF

    • Lift the battery leads to the upward position. The ribbon cable is very thin, be gentle.

  6. IM2nrpdgkOjYMlrH
    IM2nrpdgkOjYMlrH
    X4swneTUgsXcgqoR
    ypMBIRuWrhLZtikE

    • Use the plastic opening tool around the edges to loosen the battery.

    • Once the battery is loose, carefully lift from the bottom edge and remove the battery.

  7. Wfke1lEgWCiiC3Ai

    • The battery may now be removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Bradley Hinckley

Mitglied seit: 28/10/15

552 Reputation

Ein Kommentar

How do you calibrate it then? Lights up green dot, charges, won't work! Multi tester shows full power.

jvandeputte -