Einleitung

This guide will go through the steps of replacing the speaker for the Motorola MB525 starting from the tear down of the phone to replacement of the speaker itself.

  1. x4UZl13HhfiVy3Nt
    • Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.

  2. EgHV3orURmHiXpoS
    EgHV3orURmHiXpoS
    EVRA6oZSnEdAQ1ZN
    • Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.

  3. SlDigSwevLPPLWhc
    • Use a plastic opening tool to pry the battery out of the phone.

  4. A64cv6elXDWVcSZs
    • Unscrew the two silver screws located at the top of the back of the phone.

  5. he6IglspgJGumkyN
    • Use a plastic opening tool to gently pry the midframe from the rest of the phone.

  6. RRoLBcWwjFesRT4K
    RRoLBcWwjFesRT4K
    cpLUmBavUxZSPMoI
    • Use metal spudger to pry off the middle yellow flap carefully.

  7. eBFfuPidpDJvMXqu
    eBFfuPidpDJvMXqu
    p2CXLDkJabeJnXwQ
    V2xbRhXrdLRdA1ar
    • Use tweezers again to pry off the second yellow flap carefully.

  8. i6YM3SBOetPV1AEc
    • The motherboard is the whole green board. Pry it off carefully with tweezers from the sides and place it aside.

  9. vuUDPuWBB2WgCsnj
    vuUDPuWBB2WgCsnj
    d55sfCJwN1hNwAQ4
    • Once the motherboard is removed, use either the metal tweezers or the metal spudger to remove the speaker by prying it as shown.

    • The speaker is glued to its position, thus you will have to glue the new one back on.

    • The speaker must be pried off carefully. It is very delicate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andres

Mitglied seit: 08/10/14

101 Reputation

0 Kommentare