Motorola Droid RAZR Back Cover Replacement

Geschrieben von: David Hodson
  • Kommentare: 0
Motorola Droid RAZR Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

Keine Schätzung

Einleitung

Replace your nifty Kevlar-clad back cover that you recently discovered isn't actually bulletproof.

  1. DKiykJmwsGxc4JNW
    DKiykJmwsGxc4JNW
    bxQ1uZIdV1vomdK3

    • Insert a plastic opening tool between the back cover and rear case at the lower left edge of the back cover.

    • Pry the back cover up with the plastic opening tool to free the plastic clips.

    • Continue prying along the left edge of the back cover towards the top of the phone.

  2. WhBwmtexA3AHAh3D
    WhBwmtexA3AHAh3D
    GAqNhHefYAYcrIdQ
    VPH3HbwNuoYlSZI4

    • Work the plastic opening tool across the top of the back case to free the plastic clips.

    • The top edge of the back case is very thin. Pry carefully to avoid cracking or snapping it.

    • Continue prying down the right side of the back cover to free the remaining clips.

  3. iJGdkuJvFky3qlQk
    iJGdkuJvFky3qlQk
    qAMSNdTDR4LJI1WF
    TrkxGEOUjJ5p2UYn

    • Pull the back cover away from the phone to remove it.

    • The back cover is attached to the battery with a generous amount of adhesive, so you may have to use quite a bit of force to separate the two pieces.

    • The battery must remain in the phone and not come off with the back cover or you will break the power lead.

    • Since the back cover is made of Kevlar, it can handle a fair amount of twisting and tugging without breaking.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

David Hodson

Mitglied seit: 14/04/10

148365 Reputation

0 Kommentare