Motorola Droid RAZR Maxx Back Cover Replacement

Geschrieben von: sean crocker
  • Kommentare: 2
Motorola Droid RAZR Maxx Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

5 - 10 Minuten

Einleitung

To replace your bulletproof cover that apparently wasn't so life proof.

  1. TImrlwKFXboJIi5r
    TImrlwKFXboJIi5r
    RUHraAMGxLqF6Osh

    • Remove the SIM card.

    • Remove the microSD card.

    • Insert the plastic opening tool between the back cover and the front piece of the case, freeing the plastic clips between the phone.

    • Do this along the back right side of the phone cover until you reach the top.

  2. JtTxCtNYhVQVLCFa
    JtTxCtNYhVQVLCFa
    jH3lLasKmJqBIUHy

    • Use the plastic opening tool to carefully work your way around the top of the phone, freeing the plastic clips.

    • Be cautious when using the tool around the top of the device because the plastic case is very thin and could easily be cracked or snapped.

    • Continue using the tool and pry down the remaining side and the bottom of the phone.

  3. Oykf3luGKCZF5rDS
    Oykf3luGKCZF5rDS
    LEvI3YnyJtRSZgqx
    eAiLfZaXmTTTgYG3

    • With all the plastic clips released, pull away the back cover from the phone to remove it.

    • The back cover is attached to the battery with a large amount of adhesive. Some force may be required to pull the back cover from the phone.

    • The back cover is very durable and will not break from some bending or pulling.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

sean crocker

Mitglied seit: 08/10/14

341 Reputation

2 Kommentare

Ok so I have the cover off of the back of my Droid Razr Maxx HD? But where is it that I can purchase the new back cover? I figured you guys would have at least a hyper link to somewhere I could buy it? Instead of just having instructions on how to remove the backing? Thanks Very Respectfully, Joey K

sailorjt1985 -

I have same problem. Need new back cover.

TheShellex -