Einleitung

Use this guide to remove the Moto E4 motherboard cover. Doing so allows access to the front facing camera, the rear facing camera, and the motherboard.

  1. YdNyF2oFPaL3Wr1S
    YdNyF2oFPaL3Wr1S
    cJNQSWBQwklAtRgK
    • Before removing the battery, power off your Moto E4.

    • Remove the plastic cover by gently prying it up from the notch at the bottom right corner of the phone.

    • With the phone face down, lift the battery up by the labeled tab and remove it from the device.

  2. 2mUbxuwFmN4SbSwH
    2mUbxuwFmN4SbSwH
    AKOnXUMKXTqBU1ws
    • Remove all nine 4mm screws from the top plastic cover with a Phillips driver.

  3. xukEQMYDBuT2rhM5
    xukEQMYDBuT2rhM5
    SuyJLOBYOSoyuOA2
    • Gently pry up the plastic cover from the gap between it and the phone edge.

    • Start on the right side as indicated by the first picture.

    • Continue prying around the rest of the cover in a counter clockwise path.

    • Once loose, remove the plastic cover from the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nate Tjepkema

Mitglied seit: 24/01/19

1200 Reputation

0 Kommentare