Einleitung
Follow this guide to remove or replace the battery on a Motorola Moto E6 Plus.
For your safety, discharge the battery below 25% before disassembling your phone. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.
-
-
Use an opening tool or your fingernail to pry the back cover away from the frame using the notch at the bottom right corner.
-
-
-
Use an opening tool or your fingernail to release the clips on the right edge by sliding up and around the top right corner.
-
-
-
Continue to slide the opening tool or your fingernail across the top edge to release the clips securing the back cover to the frame.
-
-
-
Continue to slide the opening tool or your fingernail down the left edge to release the clips.
-
-
-
Use a spudger or your fingernail to pry the battery up using the notch near the bottom right corner.
-
Remove the battery.
-
To reassemble your device, follow these instructions in reverse order.
For optimal performance, calibrate your newly installed battery after completing this guide.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Motorola Moto E6 Plus Answers community for help.
