Motorola Moto G XT1034 Back Case and Battery Cover Disassembly

Geschrieben von: Radostin Lobodov
  • Kommentare: 0
Motorola Moto G XT1034 Back Case and Battery Cover Disassembly

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

10 - 15 Minuten

Einleitung

  1. LZJpYQyUos3hnTBT
    LZJpYQyUos3hnTBT
    DPyGkBSSSIHOnNKd
    wfWTNEXLwL1RmAY4

    • Before you start following any of the steps of this guide, completely turn the device off.

    • Take the plastic back cover off by either using a plastic Pry tool or simply using your hands. Start from the bottom by the charging port

  2. QvK3SEKZeZDLXkVl

    • Unscrew the 3.5mm screws, total of 14, located on the back protective cover by using a T5 Torx screwdriver.

  3. Mi4RIFB2aqACIqLa
    Mi4RIFB2aqACIqLa
    EU1lhYE114runpUl

    • Use a plastic opening tool to remove the protective cover.

    • Carefully work the plastic tool around all the edges of the phone.

    • The protective cover holds the Volume and the Home buttons which might fall off the assembly when the cover is removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Radostin Lobodov

Mitglied seit: 16/10/14

2904 Reputation

0 Kommentare