Motorola Moto G7 Play Back Cover Replacement

Geschrieben von: Justin Ogihara
  • Kommentare: 2
Motorola Moto G7 Play Back Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

3 - 5 Minuten

Einleitung

You’ll need to use a heat gun or some heat source to heat up the glue and adhesive holding the back cover to your device. Should you use a heat gun or hair dryer, make sure that the heating device is at least six inches away from the device to prevent the device/battery from overheating.

  1. myPnevNSNNPKgJjY
    myPnevNSNNPKgJjY
    EO5ZBNZxWHVRNAoF

    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

    How long do you have to use the heat gun before the glue loosens?

    Pamela DeMars -

    It's worked for me with about maybe 15-20 seconds of heating per side.

    Matthieu Bister -

  2. tgoBehD2raMYJuwT

    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

  3. ib1tdYuELTqFPZih
    ib1tdYuELTqFPZih
    qx5B3YUkDDxMqSno

    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Justin Ogihara

Mitglied seit: 18/09/17

24693 Reputation

0 Kommentare