Einleitung

The following repair instructions will guide you through the removal of your Motorola V180 Motherboard. However, be careful as some parts do easily fall off.

  1. eFVNT1a3bXrMBNkF
    eFVNT1a3bXrMBNkF
    OuxDntuXBkb5nQR3
    XhQRN23wcggalwLI
    • Completely power off the Motorola V180.

    • Flip the phone over to its back side.

    • Press down the button and slide off the back cover.

    • Remove the old battery.

  2. J23OLN6eKBvmRmOS
    J23OLN6eKBvmRmOS
    tYtNRoYE5CItpaXj
    ID3ZFhLcgrpCY2Hp
    • Locate the four screws on the back of the phone.

    • Using your T6 Torx Screwdriver, unscrew these screws.

    • Remove the SIM card located on the back of the phone.

    • A ribbon near the antenna is still attached to the motherboard. Do not break this ribbon.

  3. SV4MhrnSiK5HQtVR
    SV4MhrnSiK5HQtVR
    GWw4kyswW6wQo3Jh
    • Unclip the pronged rectangle connector ribbon attached to the motherboard.

    • Remove the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Mitglied seit: 07/05/10

1 Reputation

0 Kommentare