Einleitung

This guide is for the purpose of replacing the headphone jack on a Motorola V557 cellphone.

  1. 2svKcraqZVtTgbW6
    2svKcraqZVtTgbW6
    OduWAbXLVyaHuENv
    xOLn5aKaP5DfCj5I
    • First, on the back of the phone find the silver button on the top left corner of the phone.

    • Simultaneously push down the button and slide the back plate down to reveal the battery.

  2. P364auIDATUUMEJf
    P364auIDATUUMEJf
    bgowepgMkhccTRY2
    • Grab the lower edge of the battery at the two bottom corners.

    • Pull upward on the edges to remove the battery.

  3. Xbh4sHTDiVOGnIa2
    Xbh4sHTDiVOGnIa2
    lwNtPlq3hasOryJv
    trynomSINJesIKQO
    • Push the metal slider towards the top of the phone until it clicks out of the original position.

    • Gently slide out and remove the SIM card.

  4. Lp5wvtl43A3oQjDX
    Lp5wvtl43A3oQjDX
    qZubpDKMyYN3VAMw
    • Grip the antenna and twist it counterclockwise to loosen it.

    • When it has been loosened all the way, pull gently to remove the antenna piece.

    Step 4 — To remove the Antenna ¶

    1) Loosen it.

    a) Grip the antenna

    b)Twist it counterclockwise tilll it loosens completely.

    2)Pull the antenna gently.

    Divya -

  5. KpKkSdlhOqHtD3Jr
    KpKkSdlhOqHtD3Jr
    RrOd5TXcfwhrISc6
    NtjwlXJkdPbYVisU
    • Using a pin, gently pry the top two screw covers off.

    • The large cover in the upper left of the back plate does not need to be removed.

  6. P5PXeDGIKj1GlieL
    P5PXeDGIKj1GlieL
    3jUXVcoHk5NmsPHn
    ZepVmdqXkGoDiwQS
    • At the corners of the phone, remove all four 6.0 mm Torx screws.

  7. iBjB5aYTtplSALCZ
    iBjB5aYTtplSALCZ
    i3ELT2BGqVBfIRNv
    LKSRmTSPAoXe2MVs
    • Next, insert a spudger into the marked holes, one at a time, and pry away from the phone to release the internal tabs.

    • Then, separate and detach the rear casing.

  8. CFYw3EVIISC2ptfu
    CFYw3EVIISC2ptfu
    J6dLXTKiaN1HOWux
    DJxkTBKYRyBAESAg
    • Lastly, using a push pin, lift out and to the left to release the headphone jack assembly.

    • Insert the new headphone jack assembly and repeat these steps in reverse order.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Alex Georges

Mitglied seit: 02/10/10

40 Reputation

0 Kommentare