Munchkinz Camera Replacement

Geschrieben von: David Wood
  • Kommentare: 0
Munchkinz Camera Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

If the camera is not working correctly follow this guide to replace it.

  1. GV5515spihyTBxYH

    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

  2. 3GgUIQkjOrhgogyf
    3GgUIQkjOrhgogyf
    ykdtIQOPIE6CcOCT

    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

  3. WioZRpJ1bpXaNS4N

    • After prying the device apart, it should look like this.

  4. D2T1CvLiuXOmfCvl

    • Use the slim plastic opening tool to pry the camera from its initial position.

  5. ggRN1QmfO2RnvWh1

    • Use the precision tweezers to gently disconnect the camera ribbon that is connected to the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

David Wood

Mitglied seit: 06/02/15

440 Reputation

0 Kommentare