NETGEAR WGT624 v3 Motherboard Replacement

Geschrieben von: Corey Worthington
  • Kommentare: 0
NETGEAR WGT624 v3 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

30 Minuten

Einleitung

Removing the motherboard will allow you to replace it, or give you access to the other components that are attached to it.

  1. V6qAE3xo3ETcsUPt

    • Turn the device so that the bottom is facing up.

  2. HfLKlfn1POushN5C
    HfLKlfn1POushN5C
    T1rdEJuU51M4xIcp
    xRxFBxwNoyTOTkyE

    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. X5cBjW2YyNFv1tGI
    X5cBjW2YyNFv1tGI
    5u4cfJdemplNBtJx

    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  4. WQMOmqQGAwLrFm4X
    WQMOmqQGAwLrFm4X
    VIHvuhBSJh4wwXSl

    • Lift the lower case straight up from the rest of the router.

  5. XsWUcfGOXxeAuJWV
    XsWUcfGOXxeAuJWV
    MjXFBtnDHAOIjeGJ

    • Remove the clear plastic casing by lifting it straight up from the router.

  6. hEpVMWvM2COMejTi
    hEpVMWvM2COMejTi
    pLXdfUslHSgU1Pn4

    • Separate the motherboard from the top shell by lifting it straight up from the router.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Corey Worthington

Mitglied seit: 24/01/13

50 Reputation

0 Kommentare