Nabi Jr Speakers Replacement

Geschrieben von: Tobias Young
  • Kommentare: 0
Nabi Jr Speakers Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

Keine Schätzung

Einleitung

  1. a4peHPXaNpv1KgnQ

    • Remove the red rubber case from the device. This should come off with ease.

  2. 31Rm2URx1mt3QTbA

    • Turn the device so the screen is facing away from you.

    • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

  3. OXgD2KH1Gvc2aoCY

    • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

  4. IuuqXKxQDbVltQpZ

    • After loosening the back cover, remove it from the device so you can get at the innards.

  5. hwgvfX5wcMSKMJBO

    • The speakers are located near the top of the device close to the camera.

    • Using a desoldering tool, remove the speakers from the pads they are soldered to.

    • Note that the red wire is removed from the pad labeled with a "+" and the black wire comes from the pad labeled with a "-".

    • Solder the new speaker's wires onto their respective pads

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tobias Young

Mitglied seit: 24/03/15

27 Reputation

0 Kommentare