Einleitung
This is a prerequisite guide to remove the rear bumper. Most repairs/ replacements will require you to remove the bumper and this guide will help you out.
-
-
Pull the left and right sides away from the machine to unclip the bumper. This requires that you bend the plastic a little bit. Unclip one side a little bit and allow the prong to rest on the side of the machine. Then unclip the other side and pull off the bumper parallel to both sides
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
Is the rear bumper a single piece that is both upper and lower part joined?
Sanjukta -
pull the free bottom corners out a bit to free the catches
wilfried -