Einleitung
Follow these steps to remove or replace a dead battery from your Neato Botvac D8000.
Werkzeuge
-
-
Use a Phillips #1 screwdriver to unscrew both of the 20mm screws.
-
Gently lift the battery cover.
-
Remove the battery cover to reveal the battery.
-
-
-
Use a flathead screwdriver to push down on the latch of the battery clip.
-
Simultaneously, pull on the battery while pushing down on the latch to detach the battery from the clip.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
