Newport e500 Right Side Panel Disassembly

Geschrieben von: Jeremy
  • Kommentare: 0
Newport e500 Right Side Panel Disassembly

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

3 Minuten

Einleitung

In order to replace most other parts in the Newport e500, the removal of the right side panel is required. In order to perform this operation, a Philips screwdriver and torque wrench will be required. For more information refer to page 41 of the service manual.

  1. L2VAGhPFP3JYN6RE

    • Place device so that the top cover is facing you.

    • Open the top cover.

  2. mMO5UWiPEEusnf2o

    • Remove the four hex nuts and lock washers (two at each hinge) that secure the cover to the hinges on the left side of the pneumatic box.

  3. 1Gcna2hw5ZflJMNL

    • Remove the cover and set aside. Retain hardware for re-assembly.

  4. Ysp1SHZ4yXWhEC1B

    • Carefully place the GDU on its left side.

  5. EnpReyxEm1hYTit1

    • Remove the four screws and washers at the top edge of the right side panel.

  6. 1kUoUfAnYJTvLeKg

    • Remove the two screws and washers from the underside of the right side panel.

  7. rwP2UZZXkWdjbDMI

    • Remove the right side panel. Retain hardware for re-assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jeremy

Mitglied seit: 07/04/20

589 Reputation

0 Kommentare