Einleitung

If your Nikon COOLPIX L27 screen does not turn on or is damaged, you can use this guide to replace the screen.

The screen is a vital part of the camera, it shows a preview of images and allows easy access to them. A faulty or damaged screen greatly hinders the usability of the camera. A simple repair such as this can extend the life of the camera to be used again or repurposed.

Before starting the repair, test your camera to see if it still turns on with a new pair of batteries to make sure that the screen is the only fix needed.

  1. Y63Wl5ISmUgRDOXe
    Y63Wl5ISmUgRDOXe
    DcJflxAyEHbUJQQF
    cO5MG3XMgNcbYhaW
    • Undo the latch at the bottom of the camera by pushing it to the side

    • Remove the batteries (and memory card if applicable)

  2. fKQHl2EcCyIDNFqk
    fKQHl2EcCyIDNFqk
    EwnARwPyZIAp2p25
    • Remove the two 5 mm Phillips #000 screws from the left side.

  3. jGGrQCd6gNpkGWXp
    jGGrQCd6gNpkGWXp
    nMZwWDy4DcmHOPmn
    u3dcM1jx6ftmpTU2
    • Lift the cover labeled "A/V OUT" to expose a hidden screw.

    • Remove two 5 mm Phillips #000 screws from the bottom of the camera.

  4. Uweb3vAFUhHfmQ2X
    Uweb3vAFUhHfmQ2X
    yOrKTXAIIdKUVUVS
    • Remove the two 5 mm Phillips #000 screws from the right side of the camera.

  5. BrSNQwoBMYsJLIOq
    BrSNQwoBMYsJLIOq
    B6ZIBFdi5L4FAtFQ
    SQPgD1eoH1Fi3V5O
    • Carefully pry the back cover starting from the battery latch.

    • Once all sides are loose, lift the back cover up and off.

  6. AJbZlY3YUDLaVJEW
    • Carefully lift the LCD screen up towards the bottom of the camera.

    • The LCD is connected to a cable so don't pull it out yet.

  7. UepRs556He3cCO4j
    • Lightly push back the white switch holding in the screen cable

  8. DaG5iZrYBQJwkA3N
    DaG5iZrYBQJwkA3N
    eWETiUanf26IbDON
    • Remove the cable from the camera.

    • Lift the screen out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Vishalpreet Sandhu

Mitglied seit: 18/01/22

157 Reputation

0 Kommentare