Einleitung

  1. fcYUj1mjtsYJjelR
    fcYUj1mjtsYJjelR
    xasRfa3mjsmjCKwl
    • Remove all five screws from the bottom of the camera using a Phillips #00 screwdriver.

  2. BSstcOtNvwKTpk1p
    • Open the battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of the orange lever.

    • Remove this screw using a Phillips #00 screwdriver.

  3. FAJBZGjZvGRKEPHF
    • Rotate the camera to find the side panel with the lanyard attachment.

    • Detach the side panel by the lifting bottom corner slightly with the spudger.

  4. 6YMiTV6f22yEpSdj
    • Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.

  5. e4SpyC4YDGEDKGMB
    • With the back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.

  6. T6GLZEddHOlXTiLs
    • On back of LCD screen, locate the three screws underneath the ribbon and remove them.

  7. VH5tEoQETkSRrxkn
    VH5tEoQETkSRrxkn
    nAYKFVIKGXaaqNpH
    • Take out rectangular component on the side where the screws were.

    • Pry apart screen from back casing using the spudger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ryan

Mitglied seit: 13/04/11

146 Reputation

0 Kommentare