Einleitung

Removing the battery door makes it easier to clean up after a battery leak or unscrew the bottom panel. It is also necessary for the installation of certain accessories.

  1. ltiXbdoaJXjs3WBx
    ltiXbdoaJXjs3WBx
    YKimIfyCLjyaOFIA
    • On the bottom of the camera, pull the release tab towards the center of the camera, then pull up.

  2. xSjfs56raMKMONwU
    xSjfs56raMKMONwU
    saHUHUprGYgRmuaj
    • Grip and hold the front end of the battery door at a 45-degree angle from the case.

    • Pop the battery door out by pulling the front tab up.

    • When reassembling, seat the rear tab in its slot before pushing the front tab back in.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jacob Rardin

Mitglied seit: 14/04/14

1390 Reputation

Ein Kommentar

My problem is the door on my Nikon D850 broke, leaving the small part with the two prongs in place, and I don’t know how to get them out to install a replacement door. Would appreciate suggestions tootswaller22@gmail.com

Harry Langdon -