Einleitung

This guide will show how to remove the brewer head from the coffee machine.

  1. EUZ4rhMBJyPwS5MA
    • Face the coffee machine in front of you.

    • Make sure that the coffee machine is unplugged.

    • Remove the glass carafe as it will not be needed.

  2. oWvi2kFoS2POXVxE
    • Firmly grab the tab sticking out from the head of the brewer.

  3. P2ucNvkyeAeUG2KT
    P2ucNvkyeAeUG2KT
    wCEbmVODWKIQb1Mt
    2NmmlrQ6gLtacxTk
    • With little force, pull the tab of the brewer head in reverse direction.

  4. M23panFDMDQTSYH2
    • Slide off the head in the direction away from the machine.

    • If the head does not come off smoothly by sliding, give a firm tug in the same direction.

  5. 4RWaaIg5yWIdUXHD
    4RWaaIg5yWIdUXHD
    t3ZsuIufXKdHBHtx
    NclVpeDxAAytOAO6
    • Hold the head in the same position and lift it forward until the Ninja is facing upward toward the ceiling.

  6. cRixdyd5tQKSAAVG
    • Now the brewer head is positioned to where you can seeing the bottom.

  7. 2EPNZm6eGURE4XFa
    2EPNZm6eGURE4XFa
    PhBhtLVIZHPHtnCI
    • Remove the screw with a Phillips #1 screwdriver.

    • Use Phillips #1 screwdriver.

    • Along will come a small black screw cover and spring

  8. ZZQptQgVUSWlgavE
    • Twist the black lid on top clockwise until it is completely detached.

  9. nJWNW6MwpsdUlGGM
    • With the black upper lid detached, a smaller black cover can be removed without effort.

  10. U35ytnwqnSGHCEAN
    U35ytnwqnSGHCEAN
    RmW4EaHxavdRHpPU
    • Remove the 6 screws from the seal with a Phillips #1 screwdriver.

  11. HJtuffUbKGrMTP5D
    • Once all screws are detached from the brewer head, it will be separated into two pieces leaving the filter.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Elizabeth Nguyen

Mitglied seit: 11/09/17

416 Reputation

0 Kommentare